PNWSpot MMDVM HotSpot

$140.00

The PNWSpot is a pre-built, configured and tested MMDVM hotspot that is ready to go when you receive it!

– See additional information and specifications below –

3 in stock

1. Choose Optional Accessories
2. Enter General Config (Required)
3. Enter DV Config (Required)

1. Choose Optional Accessories

  • PNWSpot Remote Head Unit

    $75.00 $60.00

    The 2.8" (Currently shipping a 3.2" screen) "Remote Head Unit" gives you a larger remote touchscreen that will allow you to tuck your hotspot away in a car (or at home) with the custom 6ft USB cable. With this screen, you can see information, status and reboot or shut down the hotspot using the popular PD0DIB layout.

    AddRemove

    If purchased, I will install the necessary drivers to allow the screen to work properly. I will then also configure the hotspot to work with the screen. When configured to work with the screen, the built-in OLED screen is not used. However this is a very simple setting to change if you wish to switch back!

2. Enter General Config (Required)

  • Default is 432.550MHz

3. Enter DV Config (Required)

  • YSF
    DMR
    D-Star
  • Required for DMR, optional (but reccomended)for YSF and D-Star. Get your ID at radioid.net

  • Required for DMR, optional (but reccomended)for YSF and D-Star. Get your ID at radioid.net

  • Required for DMR, optional for YSF and D-Star.

  • Required for DMR, optional for YSF and D-Star.

  • Required for YSF, optional for DMR and D-Star.

  • Required for YSF, optional for DMR and D-Star.

  • Required for D-Star, optional for DMR and YSF.

  • Required for D-Star, optional for DMR and YSF.

Product total

Options total

Grand total

Category:

Description

The PNWSpot is a pre-built, configured and tested MMDVM hotspot that is ready to go when you receive it!

<<< See additional info and specs <<<

Includes:
– HotSpot (Built, Configured and Tested)
– Right-Angle Antenna
– MicroSD to SD Adapter
– Blank top
– Getting Started Guide
– Configuration Card

Requires (Not Included):
– Common 5V 2A USB Power Supply
– Common Micro USB Power Cable

Additional information

Weight 4.5 oz
Size

– Length: 2-13/16"
– Width: 1-15/16"
– Height: 1-15/16" (Without Antenna)

Bands

– 2m (VHF)
– 70cm (UHF

Includes

– HotSpot (Built, Configured and Tested)
– Right-Angle Antenna
– MicroSD to SD Adapter
– Blank top
– Getting Started Guide
– Configuration Card

Requires

– Common 5V 2A USB Power Supply
– Common Micro USB Power Cable